MTL - Starting Off With A Blacksmith Workshop-Chapter 277 big machine tool

After a discussion, the conclusion reached is to continue to increase the value of prosthetics. Such a project is a good project for the disabled in the whole society that benefits the country and the people. We cannot back down at this harvest season.

Before Li Zhenhua knew about it, his prosthetic limb project had already been followed by the military. It can be said that he doesn't have to worry about it in the future, the only thing that needs him is the production.

At this time, he found Liu Xiaodong and Guo Shugui, and together they discussed the follow-up mass production of prosthetic limbs.

For the production of prosthetic limbs, the three of them decided together to set up a new company under the Kyushu Shenshou Group, called the Kyushu Shenshou Human Medical Auxiliary Equipment Production Company.

As for the specific company structure issues, Liu Xiaodong and Guo Shugui are in charge, so he doesn't have to intervene. The place where he needs to copy his hands is in the production model, and this is the main problem that needs to be solved.

In fact, prosthetics need to be customized. After all, each person's body shape is different and the missing parts are different. Although there are fixed templates for manufacturing, there are always differences.

Now that large-scale production is required, the customization model will definitely face the problem of high prices for prosthetics. If such prices remain high, it will not be conducive to promotion at all, and it will also prevent the majority of disabled people from getting benefits.

The advantage of making it into a high-end product is that Kyushu Divine Beast can make a lot of money, but they are not short of money now, and after discussion, the three of them unanimously decided on this prosthetic project. , Try to set the price as low as possible.

So what urgently needs to be solved now is the problem of prosthetic production, how to do it, so that it can be suitable for mass production.

As for this problem, neither Liu Xiaodong nor Guo Shugui can help, and he still has to figure it out by himself.

He returned to the workshop and threw himself on the sofa, then started to use his brain that he hadn't used for more than two months.

The way he finally thought of was to determine the standard size, just like the size of clothes, divide the mechanical prosthesis into many parts, and then make these parts into different sizes.

For example, if a person loses an arm, and then choose the size of the prosthesis based on the person's data, although it cannot completely match the missing part, it will be about the same size, which also solves the problem of large-scale production The problem.

With a solution, everything will be easy to handle, and then all the personnel who were established to be responsible for the manufacture of the prosthetic limb project were called together, and his ideas were announced, and the work of determining the size and size was left to these people. up.

Although the company is determined to take the road of large-scale production, it still does not block the road of customization, and still provides customized prosthetic services for disabled people who are not short of money.

That is to say, if you want to install prosthetics, but you don't like mass-produced products, you can choose high-end customization, which is completely customized according to the customer's human body data, so that customers can get more matching prostheses.

After the plan was finalized, he handed over the next work to the person in charge of the project. After that, Li Zhenhua separated the bottom of the car from the prosthesis.

After finishing this project last night, he was completely free, but he had been idle for two months before, but he didn't want to be so idle, and the big machine tool project that he didn't have enough time to do before was taken by him. put on the agenda.

In the large machine tool plan, the first thing to solve is the design of the new machine tool, and a good design also determines the accuracy and efficiency of the machine tool.

Moreover, this plan is extremely huge. This time, it is not only to design one machine tool, but to design many models, including lathes, drilling machines, milling machines, planers, grinding machines, and boring machines. This is a series of machine tool designs.

Out of these foundations, we need to design CNC machine tools on it, and finally get out of high-precision machining centers, which is the ultimate goal.

But now he doesn't plan to start from the basic airport, but takes the top-down research and development process from high-end to low-end, and directly works **** the high-precision machining center in one step.

Everything in today's society is moving toward intelligence, and it is the same in the field of machine tools. Although machine tools are built with human hands, machines do have advantages over humans in terms of stability at certain times.

According to past experience, when Li Zhenhua is making something, he often has to disassemble a hundred or eighty pieces of something first, and he will start to do it only after he understands the thing well enough.

The same is true for the machine tool this time. It is designed and manufactured after dismantling, which is especially in line with his usual style.

At this moment in the virtual laboratory, there is a square array of machining centers in front of him, with a total of twenty-five units. These CNC machining centers, which he placed like a military parade, are the ones he will be working on next. Disassembled.

These machine tools he came into contact with when he visited the Aerospace Industry Group. So far, he has been able to come into contact with the highest precision and largest vertical machining center. The diameter of the workpiece that can be processed reaches eight meters.

It can be said that this is a country's most important tool. It is not so easy to manufacture such a large machining center, not to mention its ultra-high precision. This kind of machining center also has a name called five-axis linkage high-speed gantry machining center .

The workpieces that this kind of machining center can process are super-sized workpieces with high precision, so he set his sights on this product category as soon as he came up.

As long as this large-scale research is thorough, the follow-up research can be carried out on a small basis again to form a series of high-precision machining centers.

He manifested an air vehicle in the virtual laboratory, which is the tool he used to assist disassembly, and he himself put on a set of powered exoskeleton, although it is in the virtual laboratory, but the powered exoskeleton is also Let him disassemble the speed greatly increased.

This five-axis linkage high-speed gantry machining center with a huge size, complex structure, and extremely high machining accuracy was dismantled in his hands, and with his dismantling, he also had a certain impact on this machining center. enough understanding.

And it is not limited to understanding, the parameters of each component are also recorded by his analytical eye, and formed into a drawing, even the metal of each component is no exception, all are marked on the drawing.

Now, as long as he finds the processing tools and enough materials with these drawings, he can make one in reality, and the processing center that he made by hand is estimated to be more accurate than the original prototype. .

This is only the first machine tool he disassembled in the virtual laboratory, and with the second and third machines, as more and more dismantled, he has a deeper understanding of this machine tool , I also know the shortcomings of this machine tool from the disassembly.

When he disassembled the tenth machine, he had already made a draft in his mind, which shortcomings he needed to correct, which points he needed to enlarge, and whether the total power of the machine tool was appropriate, all of which he did. I know what I know.

After he dismantled all the 5*5 machine tool squares, the ideal large-scale five-axis linkage gantry machining center in his mind was also formed. With a draft in his heart, he drew the blueprint next, and he had already drawn the drawings in each of them. What kind of metal should be used for the parts, these things are within the scope of his design.

All the drawings clearly marked every part of the machine tool in every detail. As long as they hold such drawings outside, any large machine tool factory can produce them. Of course, since there is no humanoid machine tool like Li Zhenhua, then Precision can be touching.

After drawing all the drawings of the machine tool, in the following time, he started from the materials, and optimized the materials according to the existing machine tool materials to make them more in line with the conditions of the machine tool he designed now.

When a material is produced by him, it often optimizes an advantage, but its disadvantages increase a lot. There are many such cases, and he can only start the experiment again. Fortunately, this is carried out in a virtual laboratory, so that he has A lot of time and materials to experiment.

Otherwise, according to his research and development model, if this is done in reality, even with the size of the Kyushu Divine Beast, it probably won't last long.

It can be seen that the research and development of this material is the most important subject in a country, and it is often the most basic thing, which costs the most money and time.

With the backing of the virtual laboratory to support him, many of his ideas on materials can be implemented, even if it fails, it is nothing.

Because he was not even afraid of the fryer in the virtual laboratory, he was killed by the bomb once, and he had never been killed before. When he first learned to fly an airplane, he had experienced many ways to die.

"Apricot"

After a lot of time and experimentation, he finally figured out all the materials used in the machine tool, not only the materials for the machine tool, but also the tool materials used in the machine tool. .

As far as the materials he has researched out now, if they can cause a lot of uproar in the outside world, it is the basic materials he has created now, which have good performance and many types, and are relatively simple to manufacture.

With these materials, it is also a great benefit for various industries in Kyushu. It can make many industries with substandard materials, and make products better.

Closer to home, after getting all the materials, he began to develop this super-large five-axis linkage gantry machining center.

Starting from the simplest machine tool base, and then various other parts in the machine tool, all are manufactured with the highest precision he has now.

As for the power of the machine tool, he chooses electric power, and he also has technical reserves in terms of electric motors. When he was researching electric vehicles, he studied electric motors intensively. It can be said that he should not be too familiar with electric motors.

In his opinion, the power of the machine tool can meet the power demand of the machine tool as long as the electric motor he used on the car is modified a little bit.

Moreover, his thinking on motivation is to work hard to create miracles, regardless of whether it is excess motivation, as long as the motivation meets the standard, it is fine, as for excess motivation, he does not consider it at all.

Therefore, he specially configured a main power box composed of six specially manufactured 480kw, 652 horsepower electric motors for this large machining center, with a total power of 2880kw and 3912 horsepower.

Even so, he also designed room for improvement for the power. The manufacturer can upgrade the main power box according to actual needs. As long as the manufacturer wants to add more motors, it is completely up to the manufacturer to decide.

Because of such a strong power, he not only reinforced the main shaft, but also reinforced all the parts involved in the power. Let the machine tool he designed look so strong in appearance.

But it is only strong, but not bloated, because it has also optimized the design of the appearance, and has carried out lightweight design in some places that do not need so much strength.

In this way, in the virtual laboratory, he manufactured the parts required for the machining center bit by bit. After all the parts were manufactured, he assembled all the parts together with the help of the gantry crane and the powered exoskeleton.

Now the machining center he designed and manufactured is only the first version, a version of the machining center that has not gone through a lot of experiments, and the manufacture of this machine tool is only the first step.

In the following time, he used a lot of time in the virtual laboratory to conduct actual production experiments on it. It can be said that even if there is something unreasonable about the machining center, he will conduct special research on it.

In short, he wants to optimize all the weaknesses found~www.novelbuddy.com~. According to his design concept, it is estimated that this machining center will be the most powerful one at the moment the design is completed. Machining Center.

With his unremitting efforts, he manufactured one version after another of the machining center, and when optimizing, he also used the new machining center in practice, that is, using the previous version of the machining center to manufacture the next version Components.

The optimization of the production of such a version also saves him a lot of trouble in the manufacturing process. It is almost to find weaknesses in use. Before the next version is manufactured, some weaknesses of the previous version are exposed, and then he optimizes it again.

This is only an action on the hardware, and the control software is also operated like the hardware.

The control software at the beginning made him very bloated, the file was very large, and it was slow to run, and the program was very complicated and cumbersome. And after his optimization, the control program is slowly slimming down.

The final control program can be said to be the ultimate optimization he can currently do, and this software program can be said to have complete copyright except that it is still written in the language under the English system.

The research and development of this machining center, he himself did not know how long it took to develop it in the virtual laboratory. He himself can't remember clearly, but in reality he spent a total of one and a half months.

Not only did he get into the virtual laboratory at night, but even during the day, he spent most of his time in the workshop.

After his unremitting efforts, the machining center has finally brought the design to the most perfect state at this stage. Click to download the APP of this site, massive novels, free to read!