MTL - Comeback 1992-Chapter 1128 cold winter

  Chapter 1128 Winter

  In late April, Han Songlin took a plane from Nanhai to Yuzhou, and then went to Xinghai Special Steel from Yuzhou Airport. At this time, the life of the entire steel industry is not easy. There is a serious excess of steel production capacity, and the action to reduce production capacity is extremely difficult.

   Now is resistance, to see who can resist through the "winter" and welcome the arrival of "spring".

  The cold winter of the steel industry has not had a big impact on Xinghai Special Steel.

  Xinghai Special Steel does not produce ordinary steel, but special steel.

  Special steel is still a high value-added product on a global scale.

  Many countries are not able to produce.

  In China, the demand for special steel has always been quite large, so Xinghai Special Steel is still in full production at this time.

  Han Songlin did not come to Xinghai Special Steel to find fault.

  Before coming here, Han Songlin still called Chen Dong, and Chen Dong would definitely arrange to do all the things that should be done well.

  So, when Han Songlin was visiting the Xinghai Special Steel Factory area, he didn't say anything about looking for problems in production.

   emphasizes one thing: security issues.

"Last year, Xinghai Special Steel did not have any major safety accidents. This is a very good thing, and it must be maintained in the future. If there is a safety accident, the factory will carry out a safety rectification, and then lose money if it should be lost. But for As far as the employees are concerned, their families are ruined."

  Chen Dong: "Safety has always been the most important thing in our production. The factory will organize a safety training every week, and the team leader will emphasize it again before going to work every day."

   As for other security facilities and the like, it goes without saying.

  All of them wear helmets on duty.

  Helmets and labor insurance supplies are all distributed by Xinghai Special Steel.

  Han Songlin picked up the two helmets and collided them directly, leaving no trace of the helmets.

  In terms of quality, you can tell that it is not a crooked product (fake product) from the appearance of the product.

  When Chen Dong saw Han Songlin's actions, he chuckled lightly. He didn't dare to be negligent in terms of safety.

  There is a safety issue, but their performance points will be deducted.

   It goes without saying how important the performance score is in the Xinghai Group.

   After looking around in the factory, Han Songlin and his party went into the office and sat down.

  Han Songlin listened to Chen Dong's report, and he let him pass over the business report, mainly about the research and development of Xinghai Special Steel.

  Xinghai Special Steel can be called the mother of Southwest Industry in the past.

  Now, this status can't be discarded.

   The industrial steel in the entire southwest region is basically supplied from Xinghai Special Steel.

  Steel for automobiles, aircraft, engines, machine tools, railways, etc. are all provided by Xinghai Special Steel.

   At the end of the last century, Xinghai Special Steel obtained a lot of material formulas and research materials from Eastern Europe.

  Xinghai Special Steel conducts verification and production of the formula, and then conducts research to form its own production mode.

  In these years, Xinghai Special Steel has been continuously investing in technical innovation and research and development.

  In terms of steel technology, Xinghai Special Steel is definitely the only steel company in China.

  In the whole world, few steel companies can match it.

  Because Xinghai Special Steel is the only technology-based steel company in China, during the cold winter of steel last year, Xinghai Special Steel's revenue and profits did not decline, but both rose.

  Next, we talked about this steel winter.

  If the steel winter wants to pass, it is inevitable to reduce production capacity.

   It is even normal to liquidate some steel companies.

  In this year, there is already a steel company that has completely shut down production.

  For steel enterprises, as long as they can continue to operate, they will not stop production.

  Suspension of production is also a "severe muscle" thing for steel enterprises.

   It is not easy to get to this step.

   Unless it's true.

  This time, Sanjin Xinhai Iron and Steel Group broke its capital chain and immediately stopped production, which also caused a shock in the domestic capital circle.

  In fact, Xinhai Iron and Steel has always been relatively concerned by public opinion.

  Xinhai Iron & Steel's Li Zhaohui married actress Che Xiao in the entertainment circle in 2010, but they divorced after a short period of time.

  The extravagance back then can only make people sigh: "Money cannot buy true love."

   "We have also noticed the matter of Xinhai Iron and Steel. Now, although Xinhai Iron and Steel and the local government want to restructure their debts, the creditors want to liquidate Xinhai Iron and Steel."

   "Once Xinhai Iron and Steel is engaged in this way, it will basically be over anyway, and it is impossible to slow down."

  Chen Dong is very sure of this point. After the company encountered a major setback in its operation, its upward development trend was directly interrupted.

   If you can’t go up, you can only go down in a short time.

   If you can maintain stability, then you are quite awesome.

  Han Songlin nodded slightly. For them, this matter was just a matter of discussion.

  After staying at Xinghai Special Steel for less than three hours in total, Han Songlin and his party went directly to Yuzhou.

  Yuzhou Changxing Machine Tool was established on the basis of the previous Yuzhou Machine Tool. It is currently the most technologically advanced machine tool manufacturer in China.

   It goes without saying how well Changxing Machine Tool has developed over the years.

   On high-end machine tools, it can be regarded as breaking the monopoly and blockade of foreign countries.

  Han Songlin came here to see the intelligent machine tool C5.

  In the future, industrial production will enter the era of intelligence. What about the product?

   will enter the era of customization.

  Customized production means that it is no longer the same as before, and the production line remains unchanged for a long time.

  Now there are new requirements for the production line, which must be able to make continuous changes according to the production plan.

  The production line was producing product A in the first minute, and after a short adjustment, the production line was able to produce product B in the next minute.

   After years of research and development, the intelligent machine tool C5 was finally released.

   On C5, Changxing Machine Tool can invest quite a lot.

   For this reason, Xinghai Group is also constantly injecting capital into Changxing Machine Tool, otherwise, it really can't hold on.

  Looking at the machine tool in front of me, the whole machine tool is full of sense of technology.

   In terms of operation, C5 is as simple as possible.

  Many things do not require human operation at all, and the whole thing is controlled by the system.

  What you want to produce, you only need to input the drawings.

   Even, there is no need to come to the site, just sitting in the office, you can connect to C5, and then directly operate C5 for production.

  Of course, putting in materials and so on has to be done by people.

  It can be equipped with a mechanical arm or something on the side to place materials specially.

  C5's control program system is written in easy language and displayed in Chinese.

  C5 intelligent machine tools are also prohibited from export.

   With the enhancement of scientific and technological strength, Huaguo also has a list of prohibited exports of sensitive technologies.

  Looking at this list, you can know the technological strength of the enterprise.

  Han Songlin looked at the running C5 intelligent machine tool through the glass.

   During the operation of the entire machine tool, no one needs to do anything.

   Tool changing and so on are all automatic.

   During the entire machine tool processing process, everything is automated, just wait for the required parts to be processed.

  (end of this chapter)