MTL - Starting Off With A Blacksmith Workshop-Chapter 19 start

The two-row car drove the three of them towards Yuanmi's specialty store, and Li Zhenhua drove steadily.

The three of them bought the equipment that Guo Shugui thought was suitable in the Yuanmi Specialty Store.

At this time, all the things that should be purchased have been bought, and the preliminary work is considered complete.

At noon, the three of them found a donkey meat restaurant with local characteristics in the county town and had something to eat.

As the saying goes, dragon meat in the sky and donkey meat on the ground, dragon meat refers to flying dragons, which are now protected animals, but donkey meat on the ground can still be eaten by people.

There are sixteen places in the country that are famous for their donkey meat, and this county is one of them.

In addition, here is Dong'e City, which is close to Shuicheng. Donkey skins are boiled for glue there, and donkey meat is used for food in the county here. Anyway, the donkeys are not spoiled at all.

Li Zhenhua who ate this meal was also very happy. After staying in Hujiang for so long, he missed nothing but the meat from his hometown.

Guo Shugui, a foreign boy, was also conquered by the donkey meat this time. Before that, he always thought that the donkey meat in Hejian was delicious, but this time, the donkey meat here was the same as Hejian.

The three of them ate and drank enough, Li Zhenhua continued to drive forward, and Guo Shugui took out the equipment he had just bought and fiddled with it.

But Liu Xiaodong, who was sitting in the back, leaned back on the chair, squinted his eyes and fell asleep after a while.

Liu Xiaodong didn't wake up until the car drove back to the door of the blacksmith's shop.

Especially when walking through the town on the road, Liu Xiaodong's wobble made her sleep more soundly.

The three of them moved the things they purchased to the lobby of the sales department on the first floor.

Abandoning the two of them, Li Zhenhua came to the small supermarket with one hundred yuan, gave the car keys to the supermarket proprietress, and refused several times before the other party paid for the car he had prepared by himself.

Debts of favor are easy to owe, but not easy to repay. Sometimes the less owed shall prevail.

When Li Zhenhua came back, nothing else was moved, except for Liu Xiaodong and him to carry a large plastic bucket into the warehouse and lock the door.

This big bucket is full of hydrochloric acid, and if something happens to it, no one can afford it.

After properly placing the dangerous hydrochloric acid, Li Zhenhua took the two of them to move the remaining things and put them in place one by one.

By the time the three of them packed up their things, it was already one o'clock in the afternoon.

Li Zhenhua originally wanted to let the two of them take a rest, but for the other two, what happened next was what they were interested in.

Li Zhenhua could only respect them, and then took the two of them to the backyard to start a furnace.

Li Zhenhua wanted to forge the Damascus pattern, so he had to forge two different steels together.

Moved the cutting machine out of the warehouse. This one is not the handheld one like the angle grinder, but the one with the seat.

Replace with cutting discs specially used for cutting steel, and adjust the cutting size.

The work of cutting two kinds of stainless steel bars was handed over to Liu Xiaodong.

He also played in the blacksmith shop since he was a child, and he still knows some processes and can use tools.

Guo Shugui also took a handheld shooting device and started to shoot in the yard.

He beat the stove for a while, and the air hammer for a while, and he didn't even let go of the long bench with the grindstone.

He also told Li Zhenhua that this millstone was a witness of the blacksmith shop.

'squeak'

The piercing sound of cutting metal came, and Li Zhenhua had already started the stove.

Next to Liu Xiaodong, take some two kinds of cut steel bars and put them on the anvil.

Afterwards, I saw that Li Zhenhua arranged two kinds of stainless steel interspersed, one piece of 410 and one piece of 420, so that they were arranged 30 centimeters thick.

Then Li Zhenhua turned on the cold welding machine next to him and welded many stainless steel sheets together.

Then put the welded stainless steel into the furnace for calcination.

Taking advantage of this time, Li Zhenhua came to the air hammer, adjusted the air hammer to the highest, and adjusted the downward force to the best according to the data given by the analytical eye.

The three of them were doing their own work, and everything was moving forward in an orderly manner.

The stainless steel is gradually burning red in the furnace, reaching the point where it can be forged.

Li Zhenhua took the iron tongs and took the raw materials out of the furnace and put them on the forging hammer table.

Li Zhenhua stepped on the foot switch of the forging hammer, and the air forging hammer fell forcefully, hitting the stainless steel with a 'dang' sound.

Accompanied by the sound of Dangdang, the stainless steel gradually changed its shape according to Li Zhenhua's needs.

However, the size of the stainless steel gradually exceeded Li Zhenhua's expectation, because he placed too much material, and the thickness of 30 cm had to be pressed into a steel bar with a thickness of 4 mm.

Just the length of such a large piece of stainless steel, one can imagine how long it will be.

Li Zhenhua can only change his strategy, press a little bit, after pressing the front, cut it off and press the rest.

After pressing this piece of material, Li Zhenhua gradually became acquainted with it, and how much material should be used, how much material should be used.

The stainless steel that Li Zhenhua re-made into steel strips was cut into pieces again, and re-welded into a stainless steel cuboid.

The stainless steel went into the furnace again and burned, and then the operation was repeated.

The stainless steel produced this time has a total weight of one kilogram.

Each knife is controlled at 80 grams, and the leftovers are removed, so you can make ten table knives.

After the stainless steel had been forged several times, Li Zhenhua felt that he was ready for the next step.

Then, with the help of the eye of analysis, the prepared materials were divided into ten parts on average. UU reading www.uukanshu.com

Li Zhenhua threw one of the raw materials into the furnace for calcination, and then the big forging hammer was no longer needed.

Just use a hammer and smash it by hand. Of course, at this time, the blacksmith's assistant will be on the line, that is, with a sledgehammer.

"Fatty, don't cut it, come here and swing the sledgehammer."

Li Zhenhua yelled loudly to Liu Xiaodong who was still chopping raw materials, it's okay if you don't speak loudly, the noise in the yard is very loud at the moment, and you can't hear it if the sound is quiet.

"Okay, you go and drink some water first, and I'll come right after I finish cutting this one."

Wearing goggles, Liu Xiaodong continued to move his hands without raising his head, and shouted to the back.

Li Zhenhua didn't say to start immediately, walked to the table beside him, picked up cold warm water, and poured it into his stomach.

Guo Shugui faithfully recorded all the details.

In his eyes, these photographed things are the best materials.

Just add some post-production and cut them out, and this is a promotional film.

After Li Zhenhua finished drinking the salted water, Liu Xiaodong wiped the sweat from his brow and walked over to take a sip too.

After the two adjusted their condition, they walked towards the blacksmith furnace.

Liu Xiaodong went straight to the anvil and grabbed a large hammer next to it.

Li Zhenhua used tongs to remove the burning raw material.

This time it was different from the watermelon knife he made before. That time he only used ready-made raw materials to roughly modify the shape.

But this time, a piece of raw material was shaped like a table knife from nothing.

It can be said that this time is the normal whole process of blacksmithing.

Li Zhenhua held a small hammer, and Liu Xiaodong held a sledgehammer, and the material began to deform under the hands of the two with the sound of clinking.